These are the primary cameras we use for our broadcast. They operate on the tripods and our jib camera. We use 3 of them.

These are the roaming (wireless) cameras. We use 3 of them for shots around the stage and sanctuary.

These are the viewfinders that sit atop of the cameras 1-2 on the tripods for better viewing.

Sends fiber signal including audio and video from the camera to the fiber converter. We use 3.

Converts the fiber cable signal of both audio and video to an SDI signal for the switcher. We use 3.

The camera control panel allows us to control the brightness of the cameras and also shading. We can fine tune the color of the image you see.

The main switcher. This receives all the video inputs to allow us to switch cameras and video feed and also send to designated places like IMAG and online separately.

We record all cameras invidually to a recorder. This way if we need to edit in another shot later for TV we can. We have 6 of these.

We record our main clean feed to this Hyperdeck on a CFast card. These are fast cards to be able to handle the resolution and speed coming in.

Most all sources hit the video hub first then are distributed to the switcher, recorders and anywhere else a signal needs to be sent.

The cameras we use for capturing b-roll. We have on pro and 3 G2’s of this model.

These are prime lenses used for roamers and b-roll cameras.

These are used for roamers as well as photographers and sometimes b-roll. We use 4 of these.

This lens is used for the Ursa Broadcast cameras. We use 2. One for tripod and one for jib.

This is a box lens, We use it for one of the cameras on a tripod. It’s the main follow lens.

The wireless transmitter and receivers we use for the roamers. They send signal from the camera to the switcher. We use 3 of these.

Batteries used to power the roaming cameras. We have 4.

This tripod holds the box lens.

Goes on top of the tripod and holds the box lens.

These are the rigs that give camera support for the roamers. The camera can get heavy after long use. We use 3 of these.

The cards we use for capturing b-roll and the clean feed for the Hyperdeck.

The SSD drives we use to record the cameras individually.

The wireless station for communication to the camera operators.

Wireless comm belt pack. Used for roamers.

Headset for the wireless coms. Used for roamers.

The main computer we use for our LED wall content that runs ProPresenter 7.

The software we use for worship, lyrics, media and content for the LED wall and graphics for stream.

Main Front of House audio board in the sanctuary at our Chattanooga campus.

Broadcast audio board for livestream. Mixed in a separate room as well as the main FOH mix for our Cleveland campus.

Audio board used at our Cleveland campus for multisite stream mix.

Lighting board used at our Chattanooga and Cleveland campuses.